A Web-Based Interactive Decision Support System for a Multi-objective Lot-Sizing and Production Scheduling Model
Yannik Zeitrag, José Figueira, Miguel Alves Pereira
vol. 271, 2024, p. .

Decomposition Heuristics for Multiobjective Problems: The Food Bank Network Redesign Case
Carlos Lúcio Martins, Margarida Vaz Pato
vol. 268, 2024, p. .

Learning Efficient In-Store Picking Strategies to Reduce Customer Encounters in Omnichannel Retail
Fabio Neves-Moreira, Pedro Amorim
vol. 267, 2024, p. .

Multi-objective Disassembly Line Balancing and Related Supply Chain Management Problems under Uncertainty: Review and Future Trends
Junkai He, Feng Chu, Alexandre Dolgui, Miguel F. Anjos
vol. 272, 2024, p. .

The Impact of Platform Audits on the Manipulation of Online Reviews
Chun-Yi Liu, Fernando Oliveira, Tian-Hui You
vol. 275, 2024, p. .

Automation and Off(re)shoring: A Meta-regression Analysis
Alexandra Pinheiro, Elena Sochirca, Óscar Afonso, Pedro Cunha Neves
vol. 264, 2023, p. 108980.

Design of a Sales Plan in a Hybrid Contractual and Non-contractual Context in a Setting of Limited Capacity: A Robust Approach
Daniel Filipe Pereira, José Fernando Oliveira, Maria Antónia Carravilla
vol. 260, 2023, p. .

Implications of Using Industry 4.0 Base Technologies for Lean and Agile Supply Chains and Performance
Diessica de Oliveira-Dias, Juan Manuel Maqueira-Marin, Jose Moyano-Fuentes, Helena Carvalho
vol. 262, 2023, p. .

Let's Talk about Bad Experiences Instead of Forgetting Them: An Empirical Study on the Importance of Memory for Supply Chain Disruption Management
Murilo Zamboni, Marcos Paulo Valadares de Oliveira, Tiago Oliveira
vol. 261, 2023, p. .

Preventive Investment, Malfunctions and Liability
Peter Kort, Maria Lavrutich, Cláudia Nunes, Carlos Oliveira
vol. 263, 2023, p. 1-12.

Treble Innovation Firms: Antecedents, Outcomes, and Enhancing Factors
Ferran Vendrell-Herrero, Oscar F. Bustinza, Marco Opazo-Basaez, Emanuel Gomes
vol. 255, 2023, p. .

Endogenous Efficiency of the Dynamic Profit Maximization in the Intertemporal Production Models of Venture Behavior
Mike G. Tsionas, Pankaj C. Patel, Maria João Coelho Guedes
vol. 246, 2022, p. .

A Bilevel Approach for the Collaborative Transportation Planning Problem
Maria Joao Santos, Eduardo Curcio, Pedro Amorim, Margarida Carvalho, Alexandra Marques
vol. 233, 2021, p. .

Capacity Optimization of an Innovating Firm
Verena Hagspiel, Peter Kort, Cláudia Nunes, Rita Pimentel, Kristian Store
vol. 233, 2021, p. .

Factors Influencing Firm Propensity for ISO 9001 Withdrawal: Evidence on Decertification Tendency and Antecedents
Luis M. F. R. Ferreira, Carlos J. F. Candido
vol. 233, 2021, p. .

Internal Benchmarking to Assess the Cost Efficiency of a Broiler Production System Combining Data Envelopment Analysis and Throughput Accounting
Fabio Sartori Piran, Daniel Pacheco Lacerda, Ana Camanho, Maria C. A. Silva
vol. 238, 2021, p. .

Procurement in Humanitarian Organizations: Body of Knowledge and Practitioner's Challenges
Mohammad Moshtari, Nezih Altay, Jussi Heikkila, Paulo Gonçalves
vol. 233, 2021, p. .

Scheduling Human-Robot Teams in Collaborative Working Cells
Cristiane Ferreira, Gonçalo Figueira, Pedro Amorim
vol. 235, 2021, p. .

An Activity Based Costing Decision Model for Life Cycle Economic Assessment in Spare Parts Logistic Management
Orlando Duran, Paulo Sergio Lima Pereira Afonso
vol. 222, 2020, p. .

Exploring the Relationship between Quality Ambidexterity and Sustainable Production
Paulo J. Gomes, Graca Miranda Silva, Joseph Sarkis
vol. 224, 2020, p. .

Framing the Servitization Transformation Process: A Model to Understand and Facilitate the Servitization Journey
Tim Baines, Ali Ziaee Bigdeli, Rui Sousa, Andreas Schroeder
vol. 221, 2020, p. .

Minimizing Total Earliness and Tardiness in a Nowait Flow Shop
Jeffrey Schaller, Jorge Valente
vol. 224, 2020, p. .

Supply Chain Digitisation Trends: An Integration of Knowledge Management
Dara G. Schniederjans, Carla Curado
vol. 220, 2020, p. .

A Supporting Framework for Maintenance Capacity Planning and Scheduling: Development and Application in the Aircraft MRO Industry
Duarte Dinis, Ana Barbosa-Povoa, Angelo Palos Teixeira
vol. 218, 2019, p. 1-15.

Do Multiple Certifications Leverage Firm Performance? A Dynamic Approach
Alfonso Hernandez-Vivanco, Pedro Domingues , Paulo Sampaio, Merce Bernardo, Claudio Cruz-Cazares
vol. 218, 2019, p. 386-399.

Is It Fake? Using Potentially Low Quality Suppliers as Back-Up When Genuine Suppliers Are Unavailable
Laura Wagner, Mustafa Cagri Gurbuz, Mahmut Parlar
vol. 213, 2019, p. 185-200.

Multichannel Service Failure and Recovery in a O2O Era: A Qualitative Multi-method Research in the Banking Services Industry
João Reis, Marlene Amorim, Nuno Melao
vol. 215, 2019, p. 24-33.

Redesigning a Food Bank Supply Chain Network in a Triple Bottom Line Context
Carlos Lúcio Martins, Maria Teresa Melo , Margarida Vaz Pato
vol. 214, 2019, p. 234-247.

Adaptation and Approximate Strategies for Solving the Lot-Sizing and Scheduling Problem under Multistage Demand Uncertainty
Eduardo Curcio, Pedro Amorim, Qi Zhang, Bernardo Almada-Lobo
vol. 202, 2018, p. 81-96.

Capacity Restrictions and Supply Chain Performance: Modelling and Analysing Load-Dependent Lead Times
Salvatore Cannella, Roberto Dominguez, Borja Ponte, Jose M. Framinan
vol. 204, 2018, p. 264-277.

Competitive Uncapacitated Lot-Sizing Game
Margarida Carvalho, Joao Pedro Pedroso, Claudio Telha, Mathieu Van Vyve
vol. 204, 2018, p. 148-159.

Enhancing Supply Chain Performance through Supplier Social Sustainability: An Emerging Economy Perspective
Venkatesh Mani, Angappa Gunasekaran, Catarina Delgado
vol. 195, 2018, p. 259-272.

Supply Chain Social Sustainability: Standard Adoption Practices in Portuguese Manufacturing Firms
Venkatesh Mani, Angappa Gunasekaran, Catarina Delgado
vol. 198, 2018, p. 149-164.

Cost of Quality: Evaluating Cost-Quality Trade-Offs for Inspection Strategies of Manufacturing Processes
Muhammad Arsalan Farooq , Randolph Kirchain, Henriqueta Novoa, Antonio Araujo
vol. 188, 2017, p. 156-166.

Drum-Buffer-Rope and Workload Control in High-Variety Flow and Job Shops with Bottlenecks: An Assessment by Simulation
Matthias Thurer, Mark Stevenson, Cristóvão Silva, Ting Qu
vol. 188, 2017, p. 116-127.

Green Supply Chain Design: A Mathematical Modeling Approach Based on a Multi-objective Optimization Model
Kartina Puji Nurjanni , Maria S. Carvalho, Lino Costa
vol. 183, 2017, p. 421-432.

Improving Workload Control Order Release: Incorporating a Starvation Avoidance Trigger into Continuous Release
Nuno Octávio Fernandes, Matthias Thurer, Cristóvão Silva, Sílvio do Carmo-Silva
vol. 194, 2017, p. 181-189.

Optimization in Inventory-Routing Problem with Planned Transshipment: A Case Study in the Retail Industry
Igor T. Peres, Hugo M. Repolho, Rafael Martinelli , Nathalia J. Monteiro
vol. 193, 2017, p. 748-756.

Comparison of Machine Learning Methods Applied to the Estimation of Manufacturing Cost of Jet Engine Components
Jean-Loup Loyer, Elsa Henriques, Mihail Fontul , Steve Wiseall
vol. 178, 2016, p. 109-119.

Founded in Adversity: Operations-Based Survival Strategies of Ventures Founded during a Recession
Siri A. Terjesen, Maria João Coelho Guedes, Pankaj C. Patel
vol. 173, 2016, p. 161-169.

An Analysis of Asian Airlines Efficiency with Two-Stage TOPSIS and MCMC Generalized Linear Mixed Models
Peter Wanke, Carlos Pestana Barros, Zhongfei Chen
vol. 169, 2015, p. 110-126.

Measurement of Input-Specific Productivity Growth with an Application to the Construction Industry in Spain and Portugal
M. Kapelko, Isabel M. Horta, Ana Camanho, Alfons Lansink
vol. 166, 2015, p. 64-71.

Order Release in the Hybrid MTO-FTO Production
Nuno Octávio Fernandes, Cristóvão Silva, Sílvio do Carmo-Silva
vol. 170, 2015, p. 513-520.

The Adjustment-Cost Model of the Firm: Duality and Productive Efficiency
Elvira Silva, Alfons Lansink, Spiro Stefanou
vol. 168, 2015, p. 245-256.

A Biased Random Key Genetic Algorithm for 2D and 3D Bin Packing Problems
Jose Fernando Goncalves, Mauricio G.C. Resende
vol. 145, 2013, p. 500-510.

Lot Sizing versus Batching in the Production and Distribution Planning of Perishable Goods
Pedro Amorim, Bernardo Almada-Lobo, Márcio A. F. Belo-Filho, Franklina M. B. Toledo, Christian Almeder
vol. 146, 2013, p. 208-218.

The Dotted-Board Model: A New MIP Model for Nesting Irregular Shapes
Maria Antónia Carravilla, José Fernando Oliveira, Franklina M. B. Toledo, Cristina Ribeiro, António Miguel Gomes
vol. 145, 2013, p. 478-487.

The Efficiency of French Regional Airports: An Inverse B-Convex Analysis
Carlos Pestana Barros, Qi Bin Liang, Nicolas Peypoch
vol. 141, 2013, p. 668-674.

A Tabu Search Heuristic for Redesigning a Multi-echelon Supply Chain Network over a Planning Horizon
Márcio T. Melo, Stefan Nickel, Francisco Saldanha-da-Gama
vol. 136, 2012, p. 218-230.

Covariance versus Component-Based Estimations of Performance in Green Supply Chain Management
Vincenzo Esposito Vinzi, Pietro De Giovanni
vol. 135, 2012, p. 907-916.

Multi-objective Integrated Production and Distribution Planning of Perishable Products
Bernardo Almada-Lobo, Pedro Amorim, Hans O. Günther
vol. 138, 2012, p. 89-101.

Performance Assessment of Construction Companies: A Study of Factors Promoting Financial Soundness and Innovation in the Industry
Ana Camanho, Isabel M. Horta, Jorge Moreira da Costa
vol. 137, 2012, p. 84-93.

Single-Stage Formulations for Synchronised Two-Stage Lot Sizing and Scheduling in Soft Drink Production
Deisemara Ferreira, Alistair R. Clark, Bernardo Almada-Lobo, Reinaldo Morabito
vol. 136, 2012, p. 255-265.

Supply Chain Networks with Corporate Financial Risks and Trade Credits under Economic Uncertainty
Zugang Liu, Jose M. Cruz
vol. 137, 2012, p. 55-67.

An Optimization Approach for Managing Fresh Food Quality throughout the Supply Chain
Aiying Rong, Renzo Akkerman, Martin Grunow
vol. 131, 2011, p. 421-429.

Workload Control under Continuous Order Release
Nuno Octávio Fernandes, Sílvio do Carmo-Silva
vol. 131, 2011, p. 257-262.

Life cycle cost for technology selection: A Case study in the manufacturing of injection moulds
R. Folgado, Paulo Pecas, Elsa Henriques
vol. 128, 2010, p. 368-378.

Production planning and scheduling in the glass container industry: A VNS approach
Bernardo Almada-Lobo, José Fernando Oliveira, Maria Antónia Carravilla
vol. 114, 2008, p. 363-375.

Towards a Sustainable Fashion Retail Supply Chain in Europe: Organisation and Performance
Marisa Brito, Valentina Carbone, Corinne Meunier Blanquart
vol. 114, 2008, p. 534-553.

Axiomatic design as support for decision-making in a design for manufacturing context: A case study
A. M. Gonçalves-Coelho, António J. F. Mourão
vol. 109, 2007, p. 81-89.

Heuristics for the Early/Tardy Scheduling Problem with Release Dates
Jorge Valente, Rui Santos Alves
vol. 106, 2007, p. 261-274.

Improving the Performance of the ATC Dispatch Rule by Using Workload Data to Determine the Lookahead Parameter Value
Jorge Valente
vol. 106, 2007, p. 563-573.

Generic POLCA—A production and materials flow control mechanism for quick response manufacturing
Nuno Octávio Fernandes, Sílvio do Carmo-Silva
vol. 104, 2006, p. 74-84.

Optimal design of work-in-process buffers
José Faria, Manuel Matos, Eusébio Nunes
vol. 99, 2006, p. 144-155.

Adaptive Resource Allocation in Multimodal Activity Networks
Anabela Tereso, Madalena Araujo, Salah Elmaghraby
vol. 92, 2004, p. 1-10.

Modelling Product Returns in Inventory Control--Exploring the Validity of General Assumptions
Marisa Brito, Rommert Dekker
vol. 81, 2003, p. 225-241.

Optimal Start Times under Stochastic Activity Durations
Salah Elmaghraby, Alvaro Antunes Ferreira, Luis Valadares Tavares
vol. 64, 2000, p. 153-164.

The Undershoot of the Reorder Point: Test of an Approximation
David Pyke, Geraldo Ferrer, Manuel Baganha
vol. 45, 1996, p. 311-320.

The inventory investment equation: an empirical work using business survey data
Leonor Modesto
vol. 26, 1992, p. 79-88.